Axial Ventilator Fans and Other Air Ventilators

Axial Ventilators

Axial flow fans or industrial axial fans move an air stream along the axis of the fan. The way these fans work is similar to the propeller on an airplane: the fan blades generate an aerodynamic lift that pressurizes the air. Axial Northern Fans use a propeller to draw the air into the fan then discharge it in the same axial direction. Typical types of industrial axial fans include:

* Tube axial fans (also called duct fans),
* Panel fans (also called wall fans),
* Personnel coolers,
* Roof Ventilators,
* Air circulators,
* Vaneaxial fans

As specialists in air moving applications and equipment, Buffalo Fan Co. understands industrial blower technology and designs systems for a host of facilities and industries, and work with the best names in industrial blower equipment, including TCF, NYB, IAP. A blower can achieve much higher pressure than a fan, and can be used to produce negative pressures for industrial vacuum systems. In selecting the right industrial blower equipment to serve your needs, you must consider conditions such as:

– Required airflow through the blower;
– Static pressure through the complete system;
– Suction pressure at the blower inlet;
– Airflow conditions through the blower;
– Altitude at which the blower will be operating;
– Composition of what is going through the blower – for example, is it explosive or flammable ?

Industrial Fans and Blower Fans

Northern Fan and exhaust TCF fans do not differ significantly from non-industrial types in their basic operation. The main characteristics that make blowers and fans industrial are the heavy duty construction, wheel type, shaft and bearings, materials and gauges used. Northern Fan Co. will work through all of the necessary considerations in developing an industrial air movement system that best addresses your needs and provides you with the most advanced industrial blowers and industrial TCF exhaust fans from the leading manufacturers.

Propeller / axial wheel types may include:

– Fixed pitch
– Adjustable pitch
– Swept back design
– Impeller wheel
– Low noise
– Reversible

Bifurcated Fans are direct driven axial fans where the motor is encased in a metal box to isolate it from the airflow. The term “bifurcated” means split in two branches, or parts. In terms of a bifurcated fan, the fan is constructed so that the fan rests between two forked channels, which carry the air, creating a void behind the axis of the fan itself. This makes Northern bifurcated fans ideal for exhausting or re-circulating fumes, gases and hot air up to high temperatures. The bifurcated fan motor must have access to ambient air, and have non-overloading characteristics. TCF bifurcated fans are typically used when the motor needs to be shielded from hot gases or other threatening conditions.

HVLS fans blanket a very large area with constantly moving air to create an expansive comfort zone. As a result, the big ceiling fan (up to 24 feet in diameter) can create an evaporative cooling effect during the summer months while de-stratifying uneven floor to ceiling temperatures in the winter. This results in significant energy savings since the heating system cycles less frequently.

Oleg Cthetchel
Developer of Industrial Equipment

Fan and Industrial Blower

Oleg Tchetchel

centrifugal fan,centrifugal blower,industrial fan,industrial blower,New York Blowers,pressure blower,fan,blowers,ventilator,Twin City

***

Tags: Backward Inclined Blowers, Backward Inclined Direct Drive Blower, Belt Drive Blower, Belt Drive Propeller Fans, Blower Fan Suppliers, Centrifugal Blower Fan, Centrifugal Power Fixed Fan,Centrifugal Power Foil Fan, Direct Drive Blower, Forward Curve Belt Drive Blower, Forward Curve Blower, High Temperature Blower,Industrial Blower, Industrial Blower Manufacturer, Industrial Blower Suppliers, Industrial Centrifugal Blower, Industrial Fans and Blowers,Industrial Pressure Blower, Inline Centrifugal Fans, Large Industrial Fan, Plenum Fans, Plug Pak Fans, Propeller Fans, Radial Blade Belt Drive Blowers, Radial Blade Blower, Radial Blade Direct Drive Blowers, Belt Drive Fans, Belt Drive Industrial Fans, Belt Drive Industrial Blowers, Belt Drive Blower Fan, Industrial Large Fans, Industrial Blowers Centrifugal,Industrial Direct Drive Radial Blowers, Large Industrial Blowers, Blower High Temperature, Fans Plenum, Industrial Plenum Fans, Plenum Fan Suppliers, Plenum Fan Manufacturer, Belt Drive Fan Suppliers, Belt Drive Fan Manufacturer, Industrial Centrifugal Blower Supplier,Centrifugal Blower Fan Manufacturer, Propeller Fan Suppliers, Propeller Fan Manufacturer, Belt Drive Radial Blower Supplier, Direct Drive Blower Supplier, Belt Drive Blower Manufacturer, High Temperature Blower Suppliers, High Pressure Blower Supplier, Suppliers Centrifugal Fans,Manufacturers Centrifugal Fans, Centrifugal Industrial Power Fixed,Centrifugal Power Fixed, Centrifugal Power Foil, Industrial Centrifugal Power Fixed, Industrial Forward Curve Blower, Forward Curve Industrial Blower, Forward Curve Blower Supplier, Forward Curve Blower Manufacturer

Industrial Blowers and Industrial Fans

Industrial Blowers

Foundries are a 24 / 7 operation that demand the highest quality air moving equipment to maintain day to day operations. That is why Northern Fan offers a comprehensive line of heavy duty industrial fans designed to withstand the high temperatures and dirty airstreams associated with these environments. Depending on the specific application, we supply our fans with abrasion resistant construction, heavy duty ball bearings, center hung rotors, and a variety of dampers for controlling airflow and adapting to various conditions. Many fan applications surrounding the production of metals and minerals require special consideration when selecting the proper air moving equipment. High temperatures, corrosive gases and demanding operating conditions are commonly associated with processing these materials. As a leading supplier for the metal and mineral industry, Northern Fan provides the fans used in all stages of production including conveying, drying, classification, dust collection, pollution control systems, as well as fans for pressure / high volume applications.

Industrial Fans

The Food & Beverage Industry is comprised of wide variety of businesses that require fans for the cooling, drying, ventilating, packaging, and other process applications. Northern Fans are used in the conveying, drying and forming of animal feeds that allow for large scale production of beef, pork, dairy products, and poultry and eggs. The process of getting raw bulk grain materials from the farm to market also requires the use of fans for collecting, drying and properly storing food products. When storing fruits, vegetables and other temperature and humidity sensitive food, Northern Fans play a key role in moving refrigerated air in these precise climate control environments. Manufacturing bottles and packaging for the food and beverage industry require many fan types for numerous processes. Driven by demand, the ethanol industry is one of the first renewable fuel options for energy independence from fossil sources. The process of converting feedstock to ethanol requires a variety of fans from Northern Fan’s comprehensive line of products. This process involves dust collection at multiple points, negative lift systems for material transfer, dryers for byproduct processing, waste heat recovery, and storage ventilation.

Blowers and Fans

Northern Fan manufactures a wide range of fans and blowers for the paper industry. Due to chemical laden air and elevated temperatures associated with the digesting, bleaching, and cooking processes, special materials of construction, such as stainless steel, FRP, and special coatings are required. After the pulp is processed and prepped for the paper production, paper machines utilize our high pressure, high volume fans to provide supply and exhaust air to all stages of production from the wet end to the winding trim systems.

The recycling industry has diversified and matured in recent decades, resulting in its greater demand for high quality air moving equipment. Northern Fans and blowers are used for delivering the proper air performance for many recycling operations such as material handling and sorting, pneumatic conveying, heating, cooling, aerating, dust collection, and general HVAC. Once sorted, recycling is very similar to the manufacturing of original materials. Glass and metal are crushed, melted down, and purified, then remanufactured into such items as bottles, cans, countertops, and even concrete aggregate. Paper and cardboard are treated in chemical solutions and heated to recover the organic wood fibers to produce new product.With the broadest product range in our industry, Northern Fan can supply the equipment needed for the recycle industry’s many air moving applications. Our high quality and reliable fans and blowers will do the jobs – from transporting strands of shredded paper to providing circulation in glass ovens. Water treatment involves the removal of contaminants from waste water, sewage, and runoff. The various processes remove physical, chemical, and biological contaminants. These processes are known to be some of the most demanding applications for equipment and that is why water treatment facilities around the world rely on Northern Fan. It manufactures a variety of centrifugal and axial fans and blowers with special coatings and special materials such as stainless steel, fiberglass, and carbon fiber to withstand these corrosive environments.

Northern Industrial Supply Blowers and Fans have earned a reputation for consistently delivering products that are specifically designed to meet the industry’s stringent requirements. Northern Fan heavy duty industrial fans are used in numerous petroleum refining, chemical / plastic production, and pelletizing processes and can be customized for virtually every application including flare stacks, thermal oxidizers, heating (fired heaters), combustion air, desulfurization, dryers, pollution control systems, material handling, and steam generation (boilers). Due to the harsh operating environments commonly associated with the many petrochemical processes, Buffalo Blower offers a host of special bearings, disc couplings, mechanical shaft seals, and a wide selection of specialty coatings to comply with the industry’s governing and standard organizations such as:

• Air Movement and Control Association (AMCA) – Spark Resistant Construction;
• American Petroleum Institute (API) – Standards 560 & 673;
• American Welding Society (AWS) – D1.1 & D14.6;
• Appareils destinés à être utilisés en ATmosphères Explosives (ATEX) – Equipment Directive 94/9/EC;
• Process Industry Practices (PIP);
• American Standards of Mechanical Engineers (ASME).

For additional information please refer to http://www.northernindustrialsupplycompany.com/products/industrialfan_blowers.html

Oleg Cthetchel
Industrial Process Engineer

Industrial Centrifugal Blowers

industrial blower,industrial fan,industrial ventilator,centrifugal blower,centrifugal fan,centrifugal ventilator,pressure blower

***

Tags: Backward Inclined Blowers, Backward Inclined Direct Drive Blower, Belt Drive Blower, Belt Drive Propeller Fans, Blower Fan Suppliers, Centrifugal Blower Fan, Centrifugal Power Fixed Fan,Centrifugal Power Foil Fan, Direct Drive Blower, Forward Curve Belt Drive Blower, Forward Curve Blower, High Temperature Blower,Industrial Blower, Industrial Blower Manufacturer, Industrial Blower Suppliers, Industrial Centrifugal Blower, Industrial Fans and Blowers,Industrial Pressure Blower, Inline Centrifugal Fans, Large Industrial Fan, Plenum Fans, Plug Pak Fans, Propeller Fans, Radial Blade Belt Drive Blowers, Radial Blade Blower, Radial Blade Direct Drive Blowers, Belt Drive Fans, Belt Drive Industrial Fans, Belt Drive Industrial Blowers, Belt Drive Blower Fan, Industrial Large Fans, Industrial Blowers Centrifugal,Industrial Direct Drive Radial Blowers, Large Industrial Blowers, Blower High Temperature, Fans Plenum, Industrial Plenum Fans, Plenum Fan Suppliers, Plenum Fan Manufacturer, Belt Drive Fan Suppliers, Belt Drive Fan Manufacturer, Industrial Centrifugal Blower Supplier,Centrifugal Blower Fan Manufacturer, Propeller Fan Suppliers, Propeller Fan Manufacturer, Belt Drive Radial Blower Supplier, Direct Drive Blower Supplier, Belt Drive Blower Manufacturer, High Temperature Blower Suppliers, High Pressure Blower Supplier, Suppliers Centrifugal Fans,Manufacturers Centrifugal Fans, Centrifugal Industrial Power Fixed,Centrifugal Power Fixed, Centrifugal Power Foil, Industrial Centrifugal Power Fixed, Industrial Forward Curve Blower, Forward Curve Industrial Blower, Forward Curve Blower Supplier, Forward Curve Blower Manufacturer

Industrial Fans and Blowers

Industrial fans and blowers are mainly used to circulate the movement of air and gas in ventilation applications. Their main function is to replace impure or contaminated air with fresh air by swirling it around. Almost every industry, including agricultural, chemical, medical, oil and gas, automotive, food processing, mining and construction use blowers for different purposes such as drying, reducing heat levels, reducing smoke and odors, processing and controlling gaseous fumes.

Industrial Fans & Blowers Manufacturers and Suppliers

Industrial blowers are manufactured using a range of durable plastics and metals, or a combination of both materials. For example, industrial blowers operating in corrosive environments are usually made of polypropylene because it provides greater structural integrity and corrosion resistance, and will never de-laminate. Typical recommendations in the construction of industrial blowers are – fiberglass for temperatures above 220 degrees, and metal if pressure is above 10 w.g. (water gage).

The size of the blower may be regulated by the size of the environment in which it is to be operated. For instance, some units are big enough to house both the fan and its power supply. Smaller, portable blowers are mainly used for cleanups and in spaces that require temporary circulation or air transfer.

The air movement and control association recognizes three classes of industrial blowers, classified with numerical designation that is based on how the fan is constructed. The United States’ specifications for industrial blowers depend on the airflow in CFM (cubic feet per minute), static pressure in inches, water gage, altitude and approximate air temperature. Here’s an example:

Air conditioning can often become too large of an expense for industrial areas, but the good news is that an industrial fan can bring some much needed relief in this case. Industrial electric fans can be quite helpful for places where heat stratification, dampness, and stagnant air become frequent problems. Also, for high static pressure an industrial fan is what you need. Also known as an industrial electric blower, these units replace air as well by blowing out the old and stagnant air for a wide area that otherwise would collect this air without replenishing it in entirety.

Large Industrial Fans

Industrial fans also are helpful in removing pollutants like dust and metal particles, carbon monoxide, nitrous oxides, sulfur dioxide, sulfuric acid, and hydrocarbon solvents. Plus, industrial electric fans clearly do not use as much electricity as an air conditioner, circulating air and cooling it at a fast rate for a large space. With high-powered, energy-efficient motors, the larger motor of an industrial fan is actually guaranteed to save energy costs.

Canada Blower Co. is a supplier of blowers and fan for Pulp and Paper Industries. Tough applications mean tough fans and blowers by Canada Blower. Canada Blower is a world wide distributor of industrial process ans OEM fans and blowers, as well as fan / blower components; including high pressure blowers, high temperature fans, spark resistant and explosion proof ventilators, tubeaxial and vaneaxial high pressure ventilators. Canada Blower also does existing fans and blowers repairs, re-build, as well as dynamical wheels balancing. High-efficiency impellers result in low power consumption, operating costs, and quieter operation. All metal hardware is completely sealed from exposure to corrosion by incapsulating into FRP or plastic; the steel support frame and motor base are powder coated with a corrosion-resistant finish. In addition to being highly resistant to chemical corrosion, PP fans are self-extinguishing and will not support combustion.

 

Oleg Cthetchel
Canadian air systems engineer

Industrial Fan and Blower by Northern Fan Co.

fan blower ventilator high temperature pressure industrial stainless steel alloy fiberglass FRP heavy duty capacity process exhaust induced draft force forced I.D. F.D. ID FD combustion suction

 

fan,blower,ventilator,high,temperature,pressure,industrial,stainless,steel,alloy,fiberglass,FRP,heavy,duty,capacity,process,exhaust,induced,draft,force,forced,I.D.,F.D.,ID,FD,combustion,suction

***

Tags: Backward Inclined Blowers, Backward Inclined Direct Drive Blower, Belt Drive Blower, Belt Drive Propeller Fans, Blower Fan Suppliers, Centrifugal Blower Fan, Centrifugal Power Fixed Fan,Centrifugal Power Foil Fan, Direct Drive Blower, Forward Curve Belt Drive Blower, Forward Curve Blower, High Temperature Blower,Industrial Blower, Industrial Blower Manufacturer, Industrial Blower Suppliers, Industrial Centrifugal Blower, Industrial Fans and Blowers,Industrial Pressure Blower, Inline Centrifugal Fans, Large Industrial Fan, Plenum Fans, Plug Pak Fans, Propeller Fans, Radial Blade Belt Drive Blowers, Radial Blade Blower, Radial Blade Direct Drive Blowers, Belt Drive Fans, Belt Drive Industrial Fans, Belt Drive Industrial Blowers, Belt Drive Blower Fan, Industrial Large Fans, Industrial Blowers Centrifugal,Industrial Direct Drive Radial Blowers, Large Industrial Blowers, Blower High Temperature, Fans Plenum, Industrial Plenum Fans, Plenum Fan Suppliers, Plenum Fan Manufacturer, Belt Drive Fan Suppliers, Belt Drive Fan Manufacturer, Industrial Centrifugal Blower Supplier,Centrifugal Blower Fan Manufacturer, Propeller Fan Suppliers, Propeller Fan Manufacturer, Belt Drive Radial Blower Supplier, Direct Drive Blower Supplier, Belt Drive Blower Manufacturer, High Temperature Blower Suppliers, High Pressure Blower Supplier, Suppliers Centrifugal Fans,Manufacturers Centrifugal Fans, Centrifugal Industrial Power Fixed,Centrifugal Power Fixed, Centrifugal Power Foil, Industrial Centrifugal Power Fixed, Industrial Forward Curve Blower, Forward Curve Industrial Blower, Forward Curve Blower Supplier, Forward Curve Blower Manufacturer

Centrifugal Industrial Blowers – NISCO Blowers and Fans

Centrifugal fans employ the use of a rotating impeller to increase the speed of air stream. The centrifugal speed increases as the air stream reaches the ends of the fan blades and is then converted to pressure. These fans are able to produce high pressures, making them suitable for harsh operating conditions, such as:

* Systems with high temperatures
* Moist or dirty air streams
* Material handling/conveying

Northern Fan Co. has considerable experience with air moving applications. Fans are the “heart” of all ventilation systems, and essential for all industrial processes that require air flow. Northern Fan Co. application experience with nyb fans and blowers is pivotal to the success of a complete air handling package and includes:

– Cast aluminum pressure blowers, axial and vaneaxial fans, industrial exhausters, roof ventilators, centrifugal fans and marine duty fans for a host of air moving requirements;

Continue reading Centrifugal Industrial Blowers – NISCO Blowers and Fans